|
10-24-2023, 07:39 AM | #1 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
SO MUCH GRINDING!! I went thru like 35 cheap-o sanding discs ... i did the back first and ground the face flat around the hitch but didn't really like it. left the front full weld around there, and now i'm debating going back to cut out the weld to re-make a full weld on the back. probably doesn't matter either way.
wife said i should clear them, the silver wouldn't look bad against the blue.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| Last edited by 6DoF; 10-24-2023 at 07:46 AM. |
10-24-2023, 12:14 PM | #2 |
- The Don -
Join Date: Sep 2002
Location: MN
Posts: 48,466
|
Driving the Vette like that, the ONLY way to own one
Those bumpers - wow, clean, yeah, clear them - you can always go back and paint them later if you changed your mind. Wow!! Nice work dude...know it took some time, but worth it!
__________________
To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes |
10-26-2023, 06:59 AM | #3 |
Needs moar dagger
|
Bumpers look great. I like the flush mount look on the hitch. Raw with clear coat would be a different look. I always got whatever Bmx frame I was buying in some sort of raw finish. Just thought they looked cool.
|
10-30-2023, 06:50 AM | #4 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
bumpers are DONE and on! i'm pretty happy with em. was a lot of work but learned how to finish metal better, and way better price. i even put a receiver without a ball in there for emergency situations, and the front battery is easy for the receiver mount winch leads to reach.
needs a slightly lower back spacing wheel and 31s, but later. also need to make some rocker armor to cover where the old bumper used to. Spartan locker in the back is 1000x better driving in the rain, i actually have the traction to accelerate now. found the worst over-use of RTV i've ever seen when i popped the diff
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
10-30-2023, 07:11 AM | #5 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
the TDI forum is having a discussion over a TDI swap'd XJ with a stick vs the AW4. apparently "auto's stuck" set some ppl off
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
10-30-2023, 10:16 AM | #6 |
- The Don -
Join Date: Sep 2002
Location: MN
Posts: 48,466
|
Nice, damn 2 door, TDI, custom bumpers...you rare, dog!!
LOL, the auto vs manual debate
__________________
To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes |
10-30-2023, 12:23 PM | #7 |
Senior Member
|
Part of me wants another XJ again very much.
The other part of me remembers how cramped they felt 15 years ago. . Not so much in the legs, but my torso being tall...head height was a premium.
__________________
- James I like diesels |
10-30-2023, 01:40 PM | #8 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
yeah ... that's still a thing! i'd love to do thinner seats with lower mounts.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-01-2023, 08:02 AM | #9 |
Needs moar dagger
|
|
10-30-2023, 02:56 PM | #10 |
- The Don -
Join Date: Sep 2002
Location: MN
Posts: 48,466
|
Tall people problems, I don't have them.
Chunky guy woes - yeah, it's not as roomy as a fullsize, I can attest to that
__________________
To each his own. Not all those who wander are lost. The great irony - triggered snowflakes accusing triggered snowflakes of being triggered snowflakes |
11-27-2023, 08:34 AM | #11 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
started playing the tuning game with a guy, trying to get this right. it starts WAY better, is way smoother, but is still kind of shooting high EGTs ... but better is better so far!
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-27-2023, 09:30 AM | #12 |
Senior Member
|
What kind of tuning software do you have? Are you able to adjust everything as far as injection quantity and timing?
Diesel tuning is somewhat sketchy to me. Things can go awry awfully quick The injection timing is the sketchy part to me.
__________________
- James I like diesels |
11-28-2023, 07:04 AM | #13 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
i'm just loading emailed tunes from a dude ... who's apparently still learning a little as we go to. but all the "big names" are like a one n done thing, where this guy is really wanting to go back n forth and make it right. we'll get there.
i mean, 12V is fixed injection timing. once you go so far, you just have to know not to go full-beans until past peak torque.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-28-2023, 09:57 AM | #14 |
Senior Member
|
Yes, the 12v is fixed injection timing because its mechanical. Set it once and you're 'done'. You can still advance or retard it though, its just a more involved process than punching some numbers in a software program. Injection timing gets a little more complicated than you're used to with ignition timing on a gasser, being compression ignition and direct injection.
__________________
- James I like diesels |
11-28-2023, 12:54 PM | #15 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
i don't even need this jeep to be crazy power or whatever ... i just want it clean and a very safe tune that'll fuel thru the capable 25psi
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-28-2023, 02:15 PM | #16 |
Senior Member
|
I can't recall that far back...did you do any fueling upgrades to support that turbo?
__________________
- James I like diesels |
11-29-2023, 06:40 AM | #17 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
yup!
running 11psi into the injection pump vs letting it draw for itself, plus i went from 0.190 injectors to 0.260's right now trying to dial in the fueling is what's giving him trouble, like there's too much or something
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-30-2023, 09:24 AM | #18 |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
so i was getting mad at the XJ for being a little jerk ... i couldn't get a decent datalog cuz it would go into limp mode on the highway occasionally, but never just around. well yesterday i got mad and started beating it like it owed me money up n down the freeway. got it hot, countless cycles of mid RPM coast to full boost back n forth, up and down gears. well something cleaned up or broke loose! could be i blew out some carbon buildup, broke in the new injectors, unstuck something from it sitting so long, who knows.
it runs noticeably smoother and i'll see about limp mode this afternoon when i go for a basic drive. cross your fingers for me we're on the up-n-up now!
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| |
11-30-2023, 01:02 PM | #19 |
Senior Member
|
Did you pull the intake and give that a good cleaning before the transplant?
__________________
- James I like diesels |
11-30-2023, 01:23 PM | #20 | |
AKA: jeepnski
Join Date: Sep 2002
Location: Pittsburgh, PA
Posts: 16,552
|
Quote:
on the other hand, i also tried to clean out the head as best i could too. i wonder if i had some buildup get stuck to a valve and keep it from seating fully ... finally cooked it off with the 1350deg EGT pull i did.
__________________
...................................___ .................. ________||___\____ ..;.;;.:;:;.,;..;|/_(O)\______ /_(O)| Last edited by 6DoF; 11-30-2023 at 01:27 PM. |
|
|
|