Quote:
Originally Posted by nblehm
Drill 2 holes for the back head bolts and seal with grommets so you can pull the head bolts out and take the head of without pulling the motor.
|
Quote:
Originally Posted by xj_man_646
In the top of the cowl? Or?
|
i was thinkin about that, but there are like 4-6 bolts under there. plus i'm not sure i can get the valve cover off, or the exhaust manifold easy.
other than the anxiety of the weight on a HF crane, it's actually not bad puling it vs other junk i've messed with. i made the engine mounts come out really easy totally out of the way, and the front clip won't have anything mounted to it but one lighting connection and 6 bolts to pull. drain some fluids, drive shaft, fuel line n starter wires.