got my bolts in and ordered a TON of parts!
Turbo's: S362/65/.7 under an S475/96/1.32 ... plus some hot side pipe fab bits
Fueling: new injectors, new valve springs, new pump governor spring
door guts: vent window assemblies, glass, seals n slides
plus electric wiper motor
did a bit of work aligning the doors, and drivers door i'm super happy with. the passenger door doesn't seam like it's going to fit. it's very tight against the cab, but adjusted all the way out ... then on the front edge at the top it's almost against the A pillar and the back has a lot of gap still ... but if i til the door back, the body lines end up way low. i have moved the door up some since the pictures, but didn't help much.
