Jeepin.com Forums - View Single Post

nblehm · 12-15-2024, 11:50 PM

Well minor update. Started to work on the coil buckets, then my welder stopped working and took the wind out of my sails. Drivers side is coming together great. Will also be able to tie the coil bucket into the trac bar bracket which is good. Leave with the frame is where I decided, will give me just a tad more lift than the last pictures ride height. Will also let me weld in a top gusset that will tie into the motor mount as well. Waiting to hear back from primeweld on the welder.

Picked these up at Home Depot for 20 bucks. They are awesome, have a magnetic base and will stick to fender wells. Really helps take the dark spaces out of my garage.

12-15-2024, 11:50 PM	#172
nblehm Needs moar dagger Join Date: Feb 2004 Posts: 26,808	Well minor update. Started to work on the coil buckets, then my welder stopped working and took the wind out of my sails. Drivers side is coming together great. Will also be able to tie the coil bucket into the trac bar bracket which is good. Leave with the frame is where I decided, will give me just a tad more lift than the last pictures ride height. Will also let me weld in a top gusset that will tie into the motor mount as well. Waiting to hear back from primeweld on the welder. Picked these up at Home Depot for 20 bucks. They are awesome, have a magnetic base and will stick to fender wells. Really helps take the dark spaces out of my garage.