The List:
(before i drive it to work)
- bracing for the rear of the bed side (made, just needs welded in)
- cut the bed sides in the fender well to fit both tires back on
- taillights (have brackets and lights, wiring 90% run)
- new battery box to mount the new single GP31 commercial
- charge cooler hoses, mount reservoir, fill with water
- final zip-tie'ing of junk along the chassis
- alignment
(before i drive it to WI in July)
- screw down bed floor
- gauges
- f/r bumpers
__________________
...................................___
.................. ________||___\____
..;.;;.:;:;.,;..;|/_(O)\______ /_(O)|
|