Jeepin.com Forums - 1997 Jeep Wrangler TJ Sport

Jeepin.com Forums (https://www.jeepin.com/forum/index.php)

- Swap Meet (https://www.jeepin.com/forum/forumdisplay.php?f=4)

- - 1997 Jeep Wrangler TJ Sport - Rock Crawler (https://www.jeepin.com/forum/showthread.php?t=282)

1997 Jeep Wrangler TJ Sport - Rock Crawler

1997 Jeep Wrangler Sport. 72,xxx miles on Jeep before build was done. 90,xxx miles on the Hemi. Gauge cluster from 2002 TJ reads 102,xxx miles.

$35,000

Specs:

Exterior Blue, Interior Grey
Half Doors
Factory Soft Top
Mesh Bikini Top

DRIVETRAIN
5.7L Hemi (90,xxx miles) ($3,000)
HotWire Auto custom wiring harness (Emissions legal) ($1,800)
545-rfe Automatic Transmission
MSD Coil Packs
Atlas 4.3:1 2 Speed Transfer Case ($3,200)
Advance Adapters Atlas TJ Shifters
2” to 2.5” single exhaust with Magnaflow spun cat and Race muffler, 02 Sensors kept
Griffin Radiator with 2 10” SPAL fans
Remote Oil Filter Kit
1-Ton Dodge Master Cylinder
TMR Customs Atlas Support Ring
Adams Driveshafts 1350 Front Driveshaft
Adams Driveshafts 1350 Front Driveshaft
RCI Fuel Cell raise into tub, sheet metal firewall closes it in, locking fuel door access
Derale Transmission Cooler

FRONT AXLE
Ford Dana 60 Front
Artec full axle truss
Artec high steer arms
PSC Full Hydraulic Steering
Yukon Chomoly Inner and Outer shafts
Yukon U-Joints
Yukon 35 Spline Hubs
Detroit Locker
5.38 Yukon Gears
1 Ton Disc Brakes with Chevy Calipers
RuffStuff Specialties Diff Cover

REAR AXLE
Tera60 Rear Center Section
Artec truss
Ballistic Fabrication diff cover
Re-tubed to Chevy 14 bolt width by Bent Metal Customs
Ballistic Fabrication 14 Bolt Spindles
14-Bolt Full Float Hubs
Dutchman Custom Shafts, (35 spline D60, 14-bolt flange)
Disc Brakes with Chevy Calipers
5.38 Yukon Gears
ARB Air Locker

FRONT SUSPENSION
Fox 2.0 14” Coilovers with DSC reservoirs
FOA Hydro Bump Stops
Custom 4-Link with Artec Brackets
2.0” x .25 Wall Control Arms
Currie Johnny Joints on all Control Arms

REAR SUSPENSION
Fox 2.0 14” Coilovers with DSC reservoirs
FOA Hydro Bump Stops
Custom 4-Link with Artec and K.O.R.E Brackets
2.0” x .25 Wall Control Arms
Currie Johnny Joints on all Control Arms

INTERIOR
Full 6 Point 1.75” DOM cage
-Through the dash
-Tied into the frame at A, B, and C-pillar
-Goed through firewall and ties into front coilover mounts
-Seats attach to cage
-Rear child bucket seats on removable cage cradle
Mastercraft Suspension Seats
Mastercraft 3” 5 Point Harnesses
Removable steering wheel
Cobra 75wXT CB
Switches for ARB locker, Compressor, Lights
CNC Cutting Brakes – Custom Stainless Braided brake lines though entire brake
System.
Autometer Transmission Temperature gauge
Heated Seats

LIGHTING:
50” CSI Single Row light bar with Poison Spyder Mount
Pair of Rigid Industries Radiance Pods on A-pillar – blue backlight
10” CSI Single Row light bar on front bumper, amber cover
6.5” SAE Flood LED’s for Headlights
Rigid Industries Chase light on back as taillight, 3rd brake light, license plate light
4” Flush Mount Taillights

TIRES/WHEELS:
(5) 42 x 14.5 17 Super Swamper IROK Bias
(5) TrailReady Hardrock 17x10 Beadlocks

ARMOR:
Custom Made Rear Bumper
Custom Made Front Bumper
Barnes4WD ¼” Belly Pan Skid Plate
Custom 3/16 Fuel Cell Skid Plate
Custom Made Hi-Line Tube Fenders
Genright Rear Full Corners with custom tube fenders
Custom Made Rock Sliders with 1.5” DOM tube

EXTRAS:
Front Frame cut and raised
Rear Frame has been back-halved
Warn Zeon 8S Winch
Factor55 1.0 Fairlead
Factor55 ProLink
CJ Fold Down Tailgate
1.75” DOM Tube Tire Carrier
Poison Spyder Hood Louvers
Optima Blue Top Battery
Hella Horns

I was interested, until I saw the dirty cupholders. :lol: Just kidding, man. That thing is really nice!

That is a beautiful Jeep. Good luck with the sale!

Quote:

Originally Posted by myjeepsbigger (Post 23682)

I was interested, until I saw the dirty cupholders. :lol: Just kidding, man. That thing is really nice!

:roflmao: Yeah, noticed that after I took all the pictures....apparently the one area I forgot to clean. :james:

****pending sale****

Dude. That was quick.

Quote:

Originally Posted by myjeepsbigger (Post 23794)

Dude. That was quick.

Yes it was. Posted it on a Rock Crawling Classifieds facebook page. TONS of responses, and within 6 hours of posting I got a full price offer and the guy sent me 2K to hold it. He's coming down Friday to pick it up. Since then, I've got about 4 or 5 other guys wanting it at full price. Insane....I couldnt keep up with the posts and replies on the facebooks.

Quote:

Originally Posted by Kurt (Post 23795)

Even with the dirty cupholder?

:confused:

Quote:

Originally Posted by Kurt (Post 23795)

:raiseshand:

called it, you all thought i was nutz

Quote:

Originally Posted by 6DoF (Post 23808)

:raiseshand:

called it, you all thought i was nutz

To be fair, I don't think I had the full rundown of the specs at that time...either that, or I didn't pay attention to it :lol:.

Impressive for sure.

Sounds to me like you coulda asked more for it!

Quote:

Originally Posted by Blue XJ (Post 23828)

Sounds to me like you coulda asked more for it!

:roflmao: I know! I was pretty surprised that it got the response that it did, and so quickly. I've been seeing Jeeps and buggy's that are built really well go for 20-30K, so I was expecting Id get a lot of lower offers. Didnt expect multiple full price offers sight-unseen within the timeframe I did. I thought I'd have to sit on it for a couple months before the right buyer came around.