Jeepin.com Forums

Jeepin.com Forums (https://www.jeepin.com/forum/index.php)
-   Jeep Talk (https://www.jeepin.com/forum/forumdisplay.php?f=2)
-   -   Post pix of your Jeep here - starting over. (https://www.jeepin.com/forum/showthread.php?t=3)

Cobound 09-27-2017 12:59 PM

You made it :rock:

Not sure you want to admit you're buddies w/ me tho, around these parts :lol:

:wave:

JEEPJERK 09-27-2017 01:19 PM

Welcome. How much does Brian pay you to be his friend?

srt8-jk 09-27-2017 01:29 PM

Quote:

Originally Posted by JEEPJERK (Post 664)
Welcome. How much does Brian pay you to be his friend?

Mostly in beer :chug:

Cobound 09-27-2017 01:35 PM

Quote:

Originally Posted by srt8-jk (Post 665)
Mostly in beer :chug:

ONLY beer :lol:

JEEPJERK 09-28-2017 10:44 PM

https://scontent-ort2-1.xx.fbcdn.net...87&oe=5A3BD1CA

elwood blues 10-16-2017 03:03 PM

2 Attachment(s)
This is what she looked like 11 years ago when I purchased it, and took it home to my folk's house in NW PA before I went overseas for a year. She was a basket, the PO had installed a homemade wooden center console, pick-and-pull grey bucket seats out of who knows what... everything under the hood was stock, it still had the smog stuff hooked up. And, it had that terrible and freaking heavy ACME top and doors on it.

http://www.jeepin.com/forum/attachme...1&d=1508183186


And this was taken on go topless day, my son and I headed to a baseball game that morning. I've screwed with it quite a bit since then, COMP cam and valve train, MC2100 carb with a 2 barrel intake from a later year, upgraded a bunch of wiring, relay's in the headlights, fog lights, windshield lights, a CB in the dash, a Tuffy center console, Bestop seats, front and rear, front and rear brakes, and lock out hubs. It always seams to be something, it's currently in the garage without an oilpan as I attempt to clean the mess underneath it from an oilpan gasket leak.

http://www.jeepin.com/forum/attachme...1&d=1508184163

6DoF 10-17-2017 05:57 AM

Quote:

Originally Posted by elwood blues (Post 1625)
COMP cam and valve train, MC2100 carb with a 2 barrel intake from a later year,

the comp was a good choice, great cam. i ran the Crane and hated it, then swapped in the COMP. but you didn't swap on a 4.0HO head while in that deep? was amazed at the difference when we did Stevie's.

elwood blues 10-17-2017 08:49 PM

Quote:

Originally Posted by 6DoF (Post 1643)
the comp was a good choice, great cam. i ran the Crane and hated it, then swapped in the COMP. but you didn't swap on a 4.0HO head while in that deep? was amazed at the difference when we did Stevie's.

Yeah, I have had zero issues with the Comp stuff, cam, valve springs, you name it. The only issue was finding the right size pushrods, but the machine shop helped me figure that out.

5 or 6 years ago when I had the engine torn down to the block, I really should have. I kick myself every time I have to fiddle with a carburetor that I should have went to a 4.0 head with FI. Back then, I think I was going to buy a dual plane intake and put a 4bbl on it. I never did that either. Hindsight, right?

6DoF 10-19-2017 06:07 AM

eh? eeeehh???

https://www.summitracing.com/parts/e...RoC67QQAvD_BwE

https://static.summitracing.com/glob....jpg?rep=False

elwood blues 10-29-2017 01:25 PM

Holy crap!!!! $1660.06??? For just the head, for that money I would rather buy this combo;

https://www.summitracing.com/parts/msd-2900/overview/

https://www.summitracing.com/parts/ofy-5999dp

6DoF 10-31-2017 08:59 AM

but that combo could yet make another 50-75hp with the head ... even a stock head.

actually, i forget what car tv show did it, but they tried a self learning EFI throttle body on a 4.0 and it failed miserably. then Rock Hound Racing, the 222 buggy, runs a holy MPFI self learning computer to run his 4.7 stroker and i'm not sure he's ever made it thru a full weekend without if failing somehow. multiple iterations and he's now going back to a stock 4.0 computer. if doing EFI, rip it from a junkyard jeep.

Dennis 11-17-2017 12:16 PM

http://1.bp.blogspot.com/--ws4pYxjiU...n+Beach+CA.jpg

elwood blues 11-23-2017 11:48 AM

Quote:

Originally Posted by 6DoF (Post 2312)
but that combo could yet make another 50-75hp with the head ... even a stock head.

actually, i forget what car tv show did it, but they tried a self learning EFI throttle body on a 4.0 and it failed miserably. then Rock Hound Racing, the 222 buggy, runs a holy MPFI self learning computer to run his 4.7 stroker and i'm not sure he's ever made it thru a full weekend without if failing somehow. multiple iterations and he's now going back to a stock 4.0 computer. if doing EFI, rip it from a junkyard jeep.


Thanks, that's all good info that I did not know. I'll save that for moving forward... or maybe I'll just do a Mercedes diesel swap :pimp:

Dennis 12-08-2017 07:42 AM

https://i.imgur.com/T78S2ha.jpg
https://i.imgur.com/wukSasG.jpg
https://i.imgur.com/1ioKS0R.jpg

Tolzer 06-09-2018 06:50 AM

http://img.photobucket.com/albums/v6...er%20X%202.jpg

Cobound 06-11-2018 11:59 AM

That's a nice clean TJ!

Got some Savvy Off Road half doors last fall, just before the snow came...put them on this year and drove around a bit to see if I liked them before I spent cash on painting them.

https://scontent-ort2-2.xx.fbcdn.net...83&oe=5BB9BC01

https://scontent-ort2-2.xx.fbcdn.net...8b&oe=5B7719D9

LOVE them...all but the idea that they don't have a seal, so using the uppers was kinda silly if all the rain would come in the lowers. Anyway, JUST got a quote on paint and was too busy w/ house work and graduation prep so they didn't get painted...GLAD I DIDN'T!!

Came across these last week - MOPAR doors :eek:

Guy sold his JK for a JL and had these, no uppers. Well, I already have uppers, thank you! Only problem, again, they need paint.

I tossed them on to see how they fit, and they are amazing!! Now I can TOTALLY use my uppers. That means, Savvy doors are for sale. Funny thing is, I just found a fix for the seals that surprisingly looks good, and it's cheap, but I'm still keeping the Mopar doors :rock:

At the moment it's the Calico Cat :lol:

https://scontent-ort2-2.xx.fbcdn.net...1d&oe=5BBA787C

Black, Anvil, White...my kids love it, I think it looks ridic, but I'll probably drive it like this a few days before I tear the doors down for paint :roflmao:

Again, those Savvy doors are sweet, but how can a guy pass up on a unicorn set of Mopars :p

Kurt 06-11-2018 03:24 PM

So how much do you want for the Savvy doors?

Cobound 06-11-2018 11:25 PM

By the time you’d pay shipping, you’d be better off going through Northridge 4x4 via new w/o mirrors. Unless you had a Tank Green JK :p

In all seriousness, $900 would do it on here, but locally I’m asking $1300 OBO. Personally, if you do order a set, DON’T get the TJ mirrors - only thing I don’t like about them.

bbaCJ8 06-12-2018 02:30 PM

I has a Jeep
https://scontent.fsnc1-1.fna.fbcdn.n...fb&oe=5BB3D330

Cobound 06-12-2018 04:50 PM

Rubber on rubber


All times are GMT -5. The time now is 04:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.