HULK
10-26-2006, 04:44 PM
Since I can t build a real one, here is one I wish I had.
Inspired by your friends at HBRK4x4
Theirs
http://img.photobucket.com/albums/0603/HULK64/Deliverance/DSCF0603.jpg
Mine
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010011.jpg
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010010.jpg
High clearance delrin links and hte battery sits on top of the front uppers to move weight up front for climbs and keeps the weight unsprung. Works pretty freakin good, limiting straps are on teh way though...
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010013.jpg
It also sports front dig. THe rear driveshaft has two halves connected via a slide. The "slide" has a 14mm hex on it and a servo slides it up to connect the two halves together, and then down into a 14mm 12pt wrench end to lock the rear tires and separate the two halves to spin. Works pretty slick. Wala- front dig. You can see the slide on the rear shaft here.
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010014.jpg
Here is the servo that operates it.
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010016.jpg
the flex shot, works like a real rig in that it is primarily droop flex, and the shocks ride about 90% compressed at ride height. Check out the mini muffler!
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010015.jpg
Still waiting on some beter stickers of the tire tracks to clean them up, and Shane from HBRK is helping me get scale stickers of all their sponsors and their logo. Should turn out pretty sweet....figured you guys might like it.
j
Inspired by your friends at HBRK4x4
Theirs
http://img.photobucket.com/albums/0603/HULK64/Deliverance/DSCF0603.jpg
Mine
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010011.jpg
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010010.jpg
High clearance delrin links and hte battery sits on top of the front uppers to move weight up front for climbs and keeps the weight unsprung. Works pretty freakin good, limiting straps are on teh way though...
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010013.jpg
It also sports front dig. THe rear driveshaft has two halves connected via a slide. The "slide" has a 14mm hex on it and a servo slides it up to connect the two halves together, and then down into a 14mm 12pt wrench end to lock the rear tires and separate the two halves to spin. Works pretty slick. Wala- front dig. You can see the slide on the rear shaft here.
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010014.jpg
Here is the servo that operates it.
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010016.jpg
the flex shot, works like a real rig in that it is primarily droop flex, and the shocks ride about 90% compressed at ride height. Check out the mini muffler!
http://img.photobucket.com/albums/0603/HULK64/Deliverance/P1010015.jpg
Still waiting on some beter stickers of the tire tracks to clean them up, and Shane from HBRK is helping me get scale stickers of all their sponsors and their logo. Should turn out pretty sweet....figured you guys might like it.
j