PDA

View Full Version : Mufflers!!!


XJ Fanatic
11-29-2005, 03:47 PM
Ok so i am trying to get the ram's exhaust done so maybe i can get it inspected this spring, alls i need is exhaust and emissions crap.

I got these
http://static.summitracing.com/global/images/prod/large/sum-g9042_w.jpg
http://store.summitracing.com/default.asp?target=egnsearch.asp&N=+-59186+-60048+-42288

Will be using these pipes
http://static.summitracing.com/global/images/prod/large/hok-16551_w.jpg
http://store.summitracing.com/default.asp?target=egnsearch.asp&N=+-59186+-60048+-42288

Now i need to decide on a muffler, i'm gonna use the cat off the jeep and another one like it i believe as its the perfect size. Plus i'm gettin mufflers for xmas, its just too loud to tune and play with it when there is just headers

I'm tossin up a few diff ones, i would perfer a fully welded muffler, since i'll be wheelin it some, dont want cherry bombs for this either, this is my throaty v8.
Keep in mind this is a 360, dont really care bout volume, other than it cant be silent or stockish

Ok so options,
you got your flow 40, while this is what i normally would jump on there are options for bout half the cost
cost $60 x 2= $120

Hooker aerochamber, supposed to flow better than a flowmaster
cost $60 x 2= $120

Summit fully welded muffler
cost $42 x 2= $84

Force Pro Fully welded, Look decent quality, supposed to have nice throaty sound and cost half that of the first 2 options
cost $30 x 2= $60

I've had a flow 40, so i know what they are like, Anyone have any experience with the others, i'm leaning towards the force pro for the cost, since i'll prolly bang em off a rock or 20

96 Sport
11-29-2005, 04:07 PM
My pops has 2 Flow 40's on his truck. I really like the way they sound, but if your gonna beat you muff's (:roflmao:) then get the cheap ones.

XJ Fanatic
11-29-2005, 04:11 PM
My pops has 2 Flow 40's on his truck. I really like the way they sound, but if your gonna beat you muff's (:roflmao:) then get the cheap ones.
you sick fawk.

good old perverted humor where would the world be without it.

Yeah i like the way dual flows sound, but for the beater/towrig/light wheeler this si gonna be i dunno if i can see spending that kinda coin on 2 mufflers... specially with my track record

96 Sport
11-29-2005, 04:12 PM
you sick fawk.

good old perverted humor where would the world be without it.

Yeah i like the way dual flows sound, but for the beater/towrig/light wheeler this si gonna be i dunno if i can see spending that kinda coin on 2 mufflers... specially with my track record
What, you had an exhaust system fall off when wheelin? :eek:





:roflmao:

XJ Fanatic
11-29-2005, 04:34 PM
there was a point where i went through a system each time out.. thank god thats over with that got expensive!

jeepless
12-02-2005, 07:04 AM
props to the flowmaster...u can beat the crap out of them and they still perform and sound new but like u said u might wanna go cheap if there going to get ripped off wheelin

mango_g_a
12-23-2005, 01:37 PM
Look for some "Flowsound" ....... they are basiclly flowmaster but cheaper

nblehm
12-23-2005, 02:53 PM
my cat fell out on hells revenge :dunno:

wrath
12-23-2005, 03:21 PM
Flowmaster sucks.

Dynomax makes some decent mufflers that flow really well (like, better than just about everybody).

Noise sucks too. I hate listening to loud exhausts these days. My wheeling rig has a really quiet exhaust and I like it.

getstuck
12-24-2005, 09:31 AM
I have two turbo mufflers sitting in the garage I was going to use on the Bronco. Bring me a right side brake line for a 79 Bronco and you can have them.

XJ Fanatic
12-24-2005, 12:35 PM
hmm interesting, too bad i'm currently broke

getstuck
12-24-2005, 02:53 PM
hmm interesting, too bad i'm currently broke

Come get them anyway, if you're broke you can't buy mufflers.

rocrunner
12-24-2005, 10:00 PM
Get some dynomax hemi turbos

XJ Fanatic
12-24-2005, 11:48 PM
Come get them anyway, if you're broke you can't buy mufflers.
haha, i know i cant, whats the inlet outlet on them, for the exhaust to clear they gotta be offset inlet center out

getstuck
12-27-2005, 06:43 PM
haha, i know i cant, whats the inlet outlet on them, for the exhaust to clear they gotta be offset inlet center out


They are offset in and out. 2 1/4"

XJ Fanatic
12-27-2005, 07:32 PM
hmm, i could prolly make em work

YJeff
12-28-2005, 12:57 AM
muff diving.

getstuck
12-28-2005, 06:33 AM
hmm, i could prolly make em work

PM me when/if you want to come get them.

YJeff
12-30-2005, 04:07 PM
PM me too. there's no way in hell i'll let you go to lansdale without stopping in sellersville along the way.